plutrusion carbon fiber square tubes (inner round )
Avaiable Size:
Outer diameter(MM) | Inner diameter(MM) |
1.4*1.4 | 0.8 |
1.7*1.7 | 1 |
2.0*2.0 | 1 |
2.5*2.5 | 1.5 |
3.0*3.0 | 2 |
4.0*4.0 | 3 |
5.0*5.0 | 4 |
6.0*6.0 | 5 |
8.0*8.0 | 6.5 |
10*10 | 8.5 |
Pultrusion carbon fiber square tubes (inner round ) ,
pultruded tube that the fibres are all in one direction. This is stronger than woven tube in tension but has lower torsional strength and stiffness.
Pultruded tube is used for racing drones, rc helicopter wing,RC airplanes and RC sailboats, kite spars.
Please advice the size and length for your design, we can provide one-stop service.
If you want to buy pultuded tube 1 Meter in length and cut it by yourself.
use a Dremel motor or a fine-toothed hacksaw, with an abrasive cutting wheel for the cleanest cut possible. Be sure the carbon tube is held securely in place, and use a gentle touch so as not to crush the carbon tube. Tape around the area to be cut to prevent splintering or separation of fibers and cut through the tape or between the tape wrappings.
main products:
If you need to buy a few regular products, Please visit our Amazon store.if you need more quantiy or customized products,please contact us by email:info@cncarbonfiber.com.